Installation Page

Installation Instructions


1 a) The Installation of the Padlock Saver is very simple. A red robertson screwdriver, a pair of scissors and the # 8 screws and washers that are included in the packaging are all that is required for the installation.
     
 
Clock Tower
Clock Tower
     
       
       
2 a) Determine which side of the Padlock Saver the hasp will be located.
Figure 1a - L/H install.  Figure 1b - R/H install.
     
   
Clock Tower
Clock Tower
Clock Tower
Clock Tower
   
   
   
Figure 1a
Figure 1b
 
   
       
       
3 a) Only remove the flap on the hasp side. Using a pair of scissors, cut along the notched line at the top and bottom of the hasp cutout. Do not cut into raised edge along the sides of flap.
       
   
Clock Tower
Clock Tower
Clock Tower
Clock Tower
     
 
Clock Tower
Clock Tower
Clock Tower
Clock Tower
       
       
       
  b) Now slowly tear the flap from the Padlock Saver until it is completely removed. Do not tear it off too fast or with excessive force to avoid damaging the Padlock Saver.
     
   
Clock Tower
Clock Tower
Clock Tower
Clock Tower
       
       
       
4 a) Centre Padlock Saver over hasp and lock. Secure cover over padlock and hasp with screws and washers provided through holes on top edge.
       
   
Clock Tower
Clock Tower
Clock Tower
Clock Tower
       
       
       
5 a) Ensure free movement of cover when opening and closing.
     
   
Clock Tower
Clock Tower